Author Archives: austest

pipe and sewer relining
20
Aug
2019

The plumbing system at home or in a business premises has an estimated useful life, beyond which you have to replace the pipes. 

In some cases, corrosion and/or cracking of the plumbing lines might necessitate replacing the plumbing much earlier than its estimated useful life. 

Pipe and sewer relining gives property owners the ability to increase the life and extend the usability of their already installed plumbing network. 

Traditionally, replacing plumbing meant excavating and removing materials surrounding the plumbing to access the pipes. 

The entire process of excavation and replacement of the pipes is not only tedious, but also expensive. 

Pipe and sewer relining using the cured-in-place pipelining (CIPP) on the other hand, is a much simpler process that is cost-efficient. 

The creation of a pipe within a pipe process involves:

  • Inspection of the sections of the pipes that need relining.
  • Cleaning of the pipes.
  • Installation of the liners and the rubber bladder.
  • Removal of the rubber bladder.

Step #1. Inspection Of The Plumbing System

Every pipe or sewer lining project begins with the inspection of the plumbing system. 

Using a remote camera system, professional plumbers inspect the entire plumbing system, noting its state and mapping the system. 

Additionally, during the inspection process, the plumbers can draw up the best and most efficient plans of how to complete the task.

Step #2. Cleaning The Pipes And Or Sewer Lines

After inspecting the pipes and sewer lines, the next step is to clean the pipes or sewer line. 

The cleaning process removes all the hardened scale, debris, tree roots, and any other material that may block the pipes or sewer lines.

Cleaning pipes and sewer lines is an essential part of relining. The cleaning process helps the relining felt to adhere to the original pipe or sewer line easily. 

While there are many cleaning methods that plumbers use, water jetting is one of the most popular and most effective pipe cleaning methods.

After cleaning the pipes or sewer lines, a final inspection is performed using CCTV cameras. This ensures that the pipes are ready for relining.

Step #3. The Installation Of The Liner

To install the liners, the felt liner is saturated with two parts. 

After that, plumbers usually score the outer surface of the liner, enhancing its ability to adhere well to the pipes. 

The proper adhesion between the two is needed to negate the chances of water filling the space between the outer walls of the new pipe and the inner walls of the old pipe.

The liner is then pulled in place and positioned correctly. The rubber bladder inside the epoxy-impregnated felt liner is expanded to adhere to the walls. 

The felt liner is allowed to cure in place, taking the shape of the pipe. The liner can be cured with the help of hot water. 

However, most of the time, it is allowed to cure naturally.

Step #4. Removing The Rubber Blabber

As the final step, the rubber bladder is deflated and removed, leaving behind a pipe within a pipe. 

To make sure the new pipe works properly, plumbers will perform some final checks. 

The junctions are inspected, and the entire length of the pipe is inspected as well. 

When plumbers are satisfied with the result, they refit the valves and couplings. 

They finally perform water flow rates and volumes testing and water quality testing to make sure the system is functioning as it should.

At the end of the installation process, the pipe or sewer line is renewed while the structure or ground remains intact and unaffected. 

CIPP helps property owners when it comes to replacing old and damaged pipes and sewer lines in a fast, cost-efficient, and non-destructive manner.

If you are looking for a trustworthy and reliable plumbing service in Melbourne, then look no further than Austest Pipeline Solutions.

We have more than 20 years’ experience in domestic, commercial, and industrial plumbing with water leak detection our speciality.

Please call us today for all your plumbing needs on 0410 609 961 or contact us through our website https://www.aus-test.com.au/contact-us/.

outdoor sprinkler leaks
12
Aug
2019

Is there a sudden spike in your water bill? 

If so, it could be a sign of water leaks in your outdoor sprinkler system, especially if you haven’t been using more water than normal. 

If this happens, you need to turn off the water supply main immediately and check the water meter. 

If the needle continues registering with the water turned off, there is a leak in the outdoor sprinkler system.

How To Detect Outdoor Sprinkler Leaks 

A leaking irrigation system could result in many issues with your front or backyard which include the following. 

  • The water might pool in the lower areas and create mould or mildew that will eventually kill your lawn.
  • The nozzles on your outdoor sprinkler systems might spray unevenly because of certain debris and fail to provide complete coverage. 

Therefore, your lawn will have dry spots that will most likely turn brown when summer comes around.

Here are some foolproof ways to help you detect an external leak in your outdoor sprinkler system. 

1. Remove the sprinkler heads in the irrigation system. To do this, you need to turn the sprinkler head counterclockwise to unscrew it then lift it up.

Some models need a special sprinkler head key, flat screwdriver or hex key to unlock the head before removing it so you need to be careful about that. 

2. Put a paperclip under the screen that lies underneath the sprinkler head to remove the screen. 

Rinse the screen under some tap water as well as the nozzle to clean it.

3. Turn the sprinkler system on at the controller then observe it properly at each head. 

The last sprinkler head should pour the water out in a fountain which is completely normal. 

It’s a sure way to flush the debris from the last head, where it accumulates in most cases. 

Now you can turn off the sprinkler system once the debris is completely cleared out.

4. Now you can replace the screen and the last sprinkler head in the system. Turn back the controller and observe all the sprinkler heads. 

Each one should immediately pop up on the riser and emit water at the same rate. Remove any grass near the sprinklers, especially those that don’t pop up.

5. Clean the screen found under each head that has an odd spray pattern. 

Note that, if there is any debris that has accumulated on the nozzle, it’s likely to cause clogging, preventing the sprinkler from working altogether.

6. If there are any cracked nozzles, you should replace them immediately. 

Cracked nozzles allow the water to drip out from underneath rather than spraying it on the distance. 

Check if there are any nozzles that have fallen out because of maintenance and replace them.

7. Are there any tilted sprinkler heads? You need to straighten them. 

If not, they will spray water directly into the grass around them causing a huge puddle in the area. 

Even worse, there will be dry spots in the area where the water doesn’t reach.

8. Once you are done, you can turn on the controller and allow the system to complete at least one irrigation cycle. 

Check for any issues and repeat the same detection procedure. 

Final Thoughts

In conclusion, your lawn will most likely suffer if there is a problem with your sprinkler system. 

The lush green lawn will disappear and you will have a lot of brown dry spots that will reduce the aesthetic appeal of your lawn dramatically. 

With these simple leak detection methods, you should be able to identify and fix any issues immediately to keep your lawn looking green and fresh for a very long time. 

If you are looking for a trustworthy and reliable plumbing service in Melbourne, then look no further than Austest Pipeline Solutions.

We have more than 20 years’ experience in domestic, commercial, and industrial plumbing with water leak detection our speciality.

Please call us today for all your plumbing needs on 0410 609 961 or contact us through our website https://www.aus-test.com.au/contact-us/

drain relining
30
Jul
2019

Whether you experience a broken pipe, backed up sewer or a tree root-infested drain in your garden, digging the drain up and replacing the pipe is becoming a thing of the past. 

Drain relining is fast becoming popular because of the many benefits of the latter. 

The process is much cheaper, easier, and more effective and comes without the expense of reinstating landscaping, tiling, paving or retaining walls. 

Let’s take a closer look at the benefits of drain relining and it’s durability.

  • The Drain Relining Process
  • The Benefits Of Drain Relining
  • Is Drain Relining Permanent?
  • The Importance Of Choosing A Reliable Plumbing Company

The Drain Relining Process

Drain relining is a process that attempts to repair the drain pipes by curing them from the inside using a special resin. 

The resin cures with time in order to form another strong pipe around the original pipe. The resin is the key to curing the pipe with this method. 

Drain relining is one of the most effective methods of fixing breaks and leaks in your sewer and stormwater drainage system. 

Pipe relining is a trenchless technology because little to no digging is involved in this process. 

That’s why drain relining is less intensive and more cost-effective compared to the traditional “dig and replace” pipe repair method. 

The Benefits Of Drain Relining

Drain relining is economical and cost-effective compared to more traditional methods. 

You wil save on cost, time, and the hassle of repaving the driveway or rebuilding the retaining wall. 

You won’t have to restore the landscape like when you use the traditional dig and replace method to fix a broken drain pipe. 

Drain relining is quick and can be done in one day. The disruption is minimal compared to digging and replacing. 

A reliable plumbing company will complete the project without all the mess and noise of excavation.

Relined pipes are much stronger than PVC pipes. It will eliminate tree root penetration and prolong the lifespan of the sewer system. 

The process has a life expectancy of at least 50 years. The system will arrest internal corrosion of pipes. It will help improve the quality of water and potability. 

Relined pipes can also comfortably withstand mains pressure. 

That’s why you need to consult with a professional and experienced plumbing company to reline the pipes in your sewer system.

Is Drain Relining Permanent?

Pipe relining is almost permanent because it has a life expectancy of more than 50 years when done correctly. 

A reputable plumbing company will be able to handle this job seamlessly. 

You should make sure that you do the necessary research when choosing the best service provider for the job.

The Importance Of Choosing A Reliable Plumbing Company

Relining your drains is one of the best long-term solutions for plumbing and pipeline issues in Australia. 

It’s a common and cost-effective method of fixing leaks and breaks in your stormwater and sewer systems. 

Choosing a reliable plumbing company is important to achieve the best results in the process. 

Your extensive research plays a big part when choosing the best plumbing company in Melbourne. 

That’s where Austest Pipeline Solutions  come into the picture.. 

They will inspect the drain and see what’s wrong and find the actual cause of the problem before relining it. 

This is done with a CCTV camera inspection – which ascertains whether relining or replacing the pipeline is the best solution. 

If relining is required, they are the best plumbing company in Melbourne to do it. 

Austest uses the most advanced technology and latest equipment to reline drains and pipelines.

If you are looking for a trustworthy and reliable plumbing service in Melbourne that uses camera inspection, then look no further than Austest Pipeline Solutions.

We have more than 20 years’ experience in domestic, commercial, and industrial plumbing with water leak detection our speciality.

Please call us today for all your plumbing needs on 0410 609 961 or contact us through our website https://www.aus-test.com.au/contact-us/.

cctv inspection
26
Jul
2019

In years gone by, finding solutions for blocked drains and pipes was pretty much a guessing game. 

A professional will take into account all the things that could possibly be causing the blockage through the particular pipe, and deduce what measures need to be taken from there in an attempt to unblock it. 

To this end, CCTV inspection is regarded as the perfect solution for finding problems within pipes and drains. 

With this comprehensive underground system, the camera will give a 360-degree view of what is going on inside the pipe. 

The end result of utilising CCTV inspection can be broken down into the following: 

  • CCTV Inspection Offers Amazing Precision
  • Recorded Data That Can Be Shared 
  • Helps To Prevent Bigger Problems 
  • Avoid Costly Excavations 
  • Non-excessive And Quick 

To get a better idea of how these benefits apply to home and business owners, let’s take a look below in more detail. 

CCTV Inspection Offers Amazing Precision 

Thanks to easy access for the camera, locating the problem is considered incredibly easy. 

Keeping the 360-degree angle in mind, nothing can hide from what the expert is seeing at the other end. 

Whether tree roots are burrowing into the pipe and blocking it, or if it is residual waste and debris, CCTV will clearly expose it. 

Compare this method to older tactics of finding the problem for blocked pipes and it makes sense why CCTV inspections are in high demand. 

The main reason for this is that once the problem has been detected, the best course of action can be taken. 

Recorded Data That Can Be Shared 

If there is more than one person involved with the pipe problem, the data collected from the inspection can be shared with others. 

For instance, renters can inform the owner of the building of the problem and provide proof at the same time. 

Helps To Prevent Bigger Problems 

Preventing damage to pipes or blockages is always better than having to fix it. 

And a CCTV inspection is such a cost-effective service, it can be used to regularly check the condition of your pipe system. 

If debris is building up or there is damage to a section of the pipe, preventative action can be taken. 

This prevents bigger problems from surfacing down the line and costing substantially more to repair. 

Avoid Costly Excavations 

As mentioned in the introduction, when traditional tactics don’t work for unblocking drains and pipes, the only course of action was to dig. 

And the reason why this can get costly is that nobody knows where to start. If the problem cannot be clearly pointed out, digging can take a very long time. 

Not to mention, it can cause a lot of damage. However, a CCTV inspection can save the property owner from excavating in the first place. 

With accuracy and precision tracking, if digging is required, it will be quick and precise. 

Non-Excessive And Quick 

It doesn’t take very long for a CCTV camera to pick up the problem. It will also clearly show what the problem is and where to find it. 

There is no need to play guessing games which means that the inspection happens incredibly quickly. 

Save Money, Time, And Frustration With Professional CCTV Inspection 

It is in the best interest of every home and business owner to utilise CCTV inspections before deciding on the best solution to their plumbing problems. 

In many cases, it is a small issue that can be sorted out without too much excavation required. 

If you are looking for a trustworthy and reliable plumbing service in Melbourne that uses camera inspection, then look no further than Austest Pipeline Solutions.

We have more than 20 years’ experience in domestic, commercial, and industrial plumbing with water leak detection our speciality.

Please call us today for all your plumbing needs on 0410 609 961 or contact us through our website https://www.aus-test.com.au/contact-us/.

camera inspection for sewer line problems
23
Jul
2019

With the advancement of technology, things have become easier for sewer inspection. 

Before the advancement of technology, identifying and solving sewer problems was tedious and consuming. 

This involved digging up the area around the pipes if you suspected that there might be a problem with their sewer system. 

Digging up costs a lot of money and wasted resources, especially if the problem was not found. 

Any sewer problem is frustrating considering the damage it causes, such as blockage and bad odour. 

With the introduction of sewer cameras, it has become easier to inspect the drains with precision. 

This can help you determine the main problem in the sewer line, the exact location, and helps to come up with ways to fix the problem. 

This is thanks to new plumbing technologies which has allowed the use of cameras for inspection. 

This has contributed to a cheaper and more effective way of dealing with sewer problems. 

From the discussion below, you will be able to understand how sewer cameras work and some of the common sewer line diagnoses.

How Does A Sewer Camera Work?

The main objective of using a sewer camera is to enable you to see whatever is causing the sewer problem without having to dig up the entire area to determine the problem. 

The cameras help you to inspect the whole sewer system to diagnose some of the problems. 

This is done by attaching a small, flexible sewer camera on a cable which plumbers then put into the sewer pipe until it reaches the area that has the blockage. 

In order to do this successfully, they need to ensure that the cable is strong enough to withstand any obstruction inside the sewer system. 

The camera has a radio transmitter which then records any problems detected, informing the plumber what the main problem is and how to best fix the problem. 

The plumber is then expected to provide a full diagnosis of the current and potential problems in the sewer system.

Sewer Line Diagnoses

Tree Roots

The roots of trees are one of the most common culprits when it comes to sewer line problems. 

They tend to grow into the underground pipes, in search of water, and this may cause the pipes to start leaking and even cause a blockage. 

This tends to happen where old pipes are, especially if the pipes are made of porous material. 

Using a camera helps to pinpoint exactly where the roots are infiltrating the pipes. 

Clogged Pipes

One of the most common problems homeowners face is the problem of clogged pipes. 

However, with sewer cameras, you are able to see the clog, understand what is causing the clog, and know what measures to take to avoid the clogging from occurring again. 

A competent plumber will be able to come up with some of the best solutions to prevent your pipes from clogging, and this may include anything from a rooter service to hydro jetting. 

The camera plays a significant role in providing the records of the main issues in the sewer system.

No one wants to spend a lot of their resources repairing something they are not familiar with. 

Therefore, you should embrace sewer camera inspections because it allows you to have a clear picture of what is happening in your sewer system. 

Besides, sewer cameras save time, money, ensure accuracy, and can be depended upon. 

If you suspect that there might be a problem in your sewer system, you should seek the services of a sewer repair company which uses camera inspection.

If you are looking for a trustworthy and reliable plumbing service in Melbourne that uses camera inspection, then look no further than Austest Pipeline Solutions.

We have more than 20 years’ experience in domestic, commercial, and industrial plumbing with water leak detection our speciality.

Please call us today for all your plumbing needs on 0410 609 961 or contact us through our website https://www.aus-test.com.au/contact-us/.

outdoor sprinkler leaks
10
Jul
2019

Having a spike in your water bill can be quite frustrating, especially if you know that your water usage has been minimal and if you have been using water-efficient equipment. 

If this is the case, you should check if you have any leaks. 

Indoor leaks are pretty easy to catch, but outdoor leaks can be quite tricky, especially if you have an irrigation system. 

Below is a DIY guide on how you can locate leaks in your sprinkler system.

How To Find A Leak

To find a leak in your outdoor sprinkler system, you will be required to check the irrigation controller first. 

After that, you should check the valves next, and lastly, the sprinklers.

  • The Irrigation Controller

Normally, the controllers do not leak water, but they have an electrical clock that controls the spring valves of the sprinklers and tells them when to release water and for what period. 

In the controller, you should check the programming to ensure that it has not been altered or returned to its default settings as this will increase the water usage. 

These irrigation controllers may keep the sprinklers running for hours on end sometimes, which can increase your water bill significantly.

  • Wet Sprinkler Valves

Once the irrigation controller has been checked, you need to locate the valve boxes and inspect them. 

You should check if they are dry or flooded; if dry, then that means that they are in perfect condition. 

However, if they are wet, it is vital to check for any worn out parts, or water leaking between the fittings and loose wiring. 

In case you are planning to do the repairs yourself, then they need to conduct an estimation of what will be required.

If you do need to replace any components, it’s best that you buy them before testing the other parts of the system. 

This being the case, the valve boxes should then be repaired. 

If you prefer to hire a professional to check it out and do the repair, you should list down all the problems to make the task easier for them.

  • Sprinkler Stations

Before getting to this step, you should ensure that the valves and controllers are working fine. 

If the area is large, then it is advised to get a friend to help you out. 

One person will need to be near the controller so that they can turn the different stations on and off, and the other will be around the sprinklers checking for any problems. 

The person at the sprinkler should carry some alert flags to mark the areas if they find any issues. 

The stations should be turned on one by one to ensure that leaks are found. Below are some of the things that the walker should look out for:

  • Water geysers will indicate some missing spray heads.
  • Flooding around the base of the sprinkler will show that some valves have malfunctioned, and are not shutting off the way they should.
  • Water spraying between the spraying heads will be a sign of a cracked lateral line.
  • Water spurts at the sprinkler base will be a sign of a broken seal.
  • Water situated on the grass between the sprinklers will mean that an underground pipe is leaking.

With the above steps, you should be able to determine where the outdoor leak is coming from. 

You can also purchase some leak detection tools to help locate the issues in the sprinkler system. 

However, they are time-consuming and may not detect the leak successfully. 

It is therefore advised for you to get the help of experienced plumbers and sprinkler technicians to help you find the leaks, and repair them without causing any damage to the lawn.

If you are looking for a trustworthy and reliable plumbing service in Melbourne, then look no further than Austest Pipeline Solutions.

We have more than 20 years’ experience in domestic, commercial, and industrial plumbing with water leak detection our speciality.

Please call us today for all your plumbing needs on 0410 609 961 or contact us through our website https://www.aus-test.com.au/contact-us/.

how do plumbing companies
30
Jun
2019

Water leaks can happen at any time but their location isn’t always so easy to figure out.

In some cases, the water damage may be apparent but the actual leak is nowhere to be seen. 

This is when plumbing companies call in the best and start incorporating all of their tricks to maximise leak detection. 

By using these solutions, they are able to pinpoint exactly where the leak is, how bad the damage may be, and what’s required moving forward.

Following is more about what plumbing companies do when it is time to detect hidden water leaks. 

Detailed Inspections

The first thing a plumber will do is analyse what’s going on. 

This can include running an eye over the water damage, understanding where the water is running, and finding out what needs to be used to move forward. 

Each step is an integral part of the process and has to be managed by a professional.

The inspection encompasses a multitude of steps to ensure everything is covered in detail.

The plumber will go through a traditional examination with nothing more than the eye test before bringing out the specialised tools. 

This is done to make sure everything is assessed manually before automated solutions are put to the test.

Contemporary Tools 

In this day and age, a number of brand-new tools have entered the market and that has made things much easier. 

Anyone that is looking to hire a professional plumbing company will notice the application of these tools for leak detection purposes.

These tools may include:

In most cases, a variety of tools will be utilised in order to make sure every potential leak is spotted immediately. 

For leak detection, the goal remains on making sure the leak is spotted as soon as possible. 

It’s essential to understand where the water is coming from with the help of these advanced tools.

Application of Prior Knowledge

With years of expertise, plumbers will always incorporate their own knowledge into the overall leak detection process. 

This knowledge comes with understanding what the property may be dealing with and what specific water damage is saying. 

This is why it’s important to call in professionals that have been doing this for a long time and have a feel for leak detection processes. 

They will be able to come in and get down to work as soon as possible without wasting a second.

Having professionals that can tap into prior knowledge is incredibly advantageous and something all plumbing companies use.

Infrared Technology 

Plumbers will often apply a number of modern-day solutions to help detect leaks. 

It’s all about understanding where to look and how to maximise the technology’s potential. 

With infrared technology, the emphasis is on temperature-based irregularities. 

The sensor is able to pick up on temperature drops, which can start to indicate a leakage behind concrete or any other heavy-duty barrier. 

When this technology is used, it can provide an impressive peek behind the barrier with nothing more than the tool in hand. 

This is why more and more plumbers keep infrared sensors on standby when it comes to leak detection. 

Concluding Thoughts 

Leaks aren’t always easy to spot and that’s why experienced plumbing companies get the job done quicker and better.

It’s important to understand what’s going on and that’s where modern-day technology plays a helping hand. 

It’s a great way to recognise issues and correct them in a timely manner. 

As time goes on, plumbing companies are pouring through these advancements and incorporating them into their routines. 

There’s real value in using these tools and that’s what makes leak detection easier than ever before.

If you are looking for a trustworthy and reliable plumbing service in Melbourne, then look no further than Austest Pipeline Solutions.

We have more than 20 years’ experience in domestic, commercial, and industrial plumbing with water leak detection our speciality.

Please call us today for all your plumbing needs on 0410 609 961 or contact us through our website https://www.aus-test.com.au/contact-us/

blocked drain
30
Jun
2019

Video cameras are invaluable tools in the plumbing business. 

Specially designed plumbing cameras help plumbing professionals conduct a visual inspection of underground pipes such as sewer lines, including pipes under your home’s foundation and under cement.

The camera inspection is done by inserting a rod with a high-resolution camera on its tip into the pipe with the blockage. 

The cameras are flexible, which allows them to travel through twists and turns in the pipes and thoroughly examine them.

The footage is transmitted in real-time to the technician, so the condition inside your drain and sewer lines can be determined instantly. 

You can view any problems directly on a monitor and footage can be saved for future reference.

Following are the most common types of cameras used to inspect blocked drains.

1. Hand-held Camera

The most common type of camera used for inspecting blocked drains is the hand-held camera. 

The design of the camera is such that the user holds it in their hand while the camera cable is inserted into the area to be investigated.

The hand-held drain inspection camera is usually cordless to allow portability when in use. It means that you can move and use it anywhere you please. 

It is lightweight, which means that you can easily carry it around or even hold it for extended periods of time.

2. Reel Inspection Camera

The reel inspection camera differs from the hand-held model since it has a long cable with a camera head at its end. 

However, it does not have a screen. The cable is connected to a compatible monitor such as a laptop, video recorder, etc. 

It allows the user to see footage captured by the camera in real-time much the same way as a hand-held model.

The lack of a monitor might seem like a disadvantage for the reel inspection camera.

However, there’s also a key advantage to this type compared with the hand-held model, which is the cable length. 

The reel inspection camera has a considerably longer cable that allows the camera to reach greater distances.

The reel inspection camera is ideal for inspecting long pipes, drains, and gutters as it can reach further into the pipe than the hand-held model can.

3. Waterproof Inspection Camera

The waterproof inspection camera is designed with a cable and camera head that’s capable of withstanding being submerged in water or other types of liquid.  

To determine the level of protection the camera has against liquids, it is always advisable to check its I.P. rating. 

Both reel inspection and hand-held inspection cameras have waterproof models available. 

Waterproof inspection cameras are ideal for inspecting any type of water pipe such as a drain, sewer, sink, or toilet. 

They are often used to check for cracks and blockages since they help determine the extent of the damage without causing further damage. 

This helps save a lot of money and time when working with water pipes, which makes them very useful to have.

Final Thoughts

The cameras used for inspecting blocked drains or sewer lines are the hand-held model, the reel inspection model, and the waterproof model. 

A sewer line or drain pipe video inspection ensures that your sewer line and drain pipes are free of defects or problems that may lead to expensive repairs later on. 

Sewer camera inspections are recommended whenever you experience repeated drain or sewer line backups, clogs, or slow drainage. 

Unexpectedly high water bills can be indicative of a leak in the sewer line that can also be identified with a sewer line video inspection.

If you are looking for a trustworthy and reliable plumbing service in Melbourne, then look no further than Austest Pipeline Solutions.

We have more than 20 years’ experience in domestic, commercial, and industrial plumbing with water leak detection our speciality.

Please call us today for all your plumbing needs on 0410 609 961 or contact us through our website https://www.aus-test.com.au/contact-us/

professional drain
30
Jun
2019

Drain problems are perhaps the most common plumbing issues for property owners. 

After all, hair, grease, rust, detergents, dirt and anything else that enters the sink or tub end up in the drain. 

When these substances build up, the drain clogs and causes many issues. Problems caused by blocked drains include:

  • Slow water drainage
  • Backflow

Problems with the drain can cause an unpleasant smell and create an unhealthy mess in your home. 

Therefore, if you suspect that you have a drainage problem with your plumbing system, then consider professional help. 

Professional plumbers know the right way to clean and fix drains and can clean your drain properly, ensuring that the problems not only goes away but don’t happen again.  

Professional Drain Services

If you’ve noticed that the shower doesn’t drain well, or there’s backflow in your toilet, then get in touch with professional plumbers near you. 

Regardless of your drainage problems, it’s always smart to let experts help you as they know the ins and outs of drain problems and the solutions. 

This will make it possible for small issues to be fixed before they turn into bigger and more expensive problems. Professional drain services include:

  • Drain inspection
  • Drain cleaning
  • Drain maintenance and repair

Drain Inspection

The best way to take care of blocked drains is to make sure that the problem doesn’t come back. 

CCTV drain inspection helps to identify the cause of the blockage and verify that repairs and installations are done correctly. 

With the help of CCTV cameras, plumbers can inspect the entire length of the drain. 

Video surveillance of the drainage system takes guessing out of the equation hence proper drainage repair and installation. 

Drain Cleaning

A clogged drain is an inconvenience and can lead to disastrous issues in a business or home. 

For this reason, many people instinctively attempt to unblock drains themselves with all sorts of things like chemical drain cleaners, bleach and other do-it-yourself solutions. 

Unfortunately, these solutions are temporary, and some may end up doing more harm than good to the drain and the plumbing system. 

Professional plumbers have the equipment, knowledge, experience, plus the techniques needed to provide top-tier drain cleaning services. 

One of the most effective methods that professional plumbers use to clean drains is the hydro jetting method. 

This method uses pressurised water to clean drains and pipes. 

The water scours through the drain getting rid of grease, debris, hair and other objects clogging the drain. 

Drain Repair

After an inspection, your plumber will decide whether relining will suffice or if drain replacement is the best solution. 

Here’s a window into the difference between drain replacement and drain relining:

Drain Relining vs Drain Replacement

Damages to the interior walls of the drain are hard to spot and often lead to bigger issues down the line. 

Drain relining provides the drain walls with a new lining ensuring that your drains are always in good shape. 

Drain relining is an excellent non-destructive drainage solution, especially for commercial buildings as no downtime is required.

On the other hand, if your drain is damaged beyond repair or problems keep recurring, then drain replacement is the best solution. 

Professional plumbers not only help with the installation of a new drain but also help you choose the right drain for your home or commercial property. 

Watch What You Flush Down Your Drains

While tree roots are a common cause of blocked drains, what you throw down your drains also plays a significant role in the condition of your drain. 

Whether in the kitchen or bathroom, make sure you dispose of the rubbish correctly. 

By maintaining your drain and watching what you put down in it, you can avoid clogged drains. However, if you run into blocked drains, call in the pros.

If you are looking for a trustworthy and reliable plumbing service in Melbourne, then look no further than Austest Pipeline Solutions.

We have more than 20 years’ experience in domestic, commercial, and industrial plumbing with water leak detection our speciality.

Please call us today for all your plumbing needs on 0410 609 961 or contact us through our website https://www.aus-test.com.au/contact-us/.

Why Are CCTVs Used For Blocked Drains?
30
Jun
2019

Drainage problems are not only an inconvenience but can also lead to health issues. 

Almost every property or home-owner has to deal with plumbing issues now and then. 

Many times, they will be equipped with tools to help with plumbing emergencies. However, what happens when you’re dealing with difficult issues? 

The wise choice would be to contact professional plumbers to help out. 

Ignoring repairs of some common plumbing problems such as a clogged sink could lead to more complicated issues later. 

Professional Plumbing Services

Professional plumbers perform a myriad of tasks, including commercial and residential plumbing. 

The plumbing system is an essential element of any building therefore, it’s only natural that you should choose an experienced expert to help install, repair and service your plumbing system. 

However, before you call a plumber near you, you need to understand who you are hiring. Do you want a plumber for your home or commercial property? 

Is there a difference between a commercial and residential plumber? 

Residential vs Commercial Plumbing Services

Residential buildings and commercial buildings are different in many ways, including the size, purpose and traffic. 

For this reason, plumbing systems will differ since each system is designed to serve a different number of people. 

Commercial drains are bigger compared to residential drains. 

Therefore, whenever you’re looking for professional plumbing services, understand your needs. For optimum results, hire the right plumber for the job. 

Plumbing Services

Professional plumbing services include:

  • Emergency plumbing
  • Leak detection services
  • Pipe Services
  • Drain Services
  • CCTV pipe & drain inspection
  • Sewer services
  • Backflow services

Emergency Plumbing Services

The plumbing system doesn’t have working hours; sometimes, you could be dealing with a leaky toilet in the middle of the night or a burst pipe during the weekend. 

When dealing with plumbing emergencies, it’s easy to feel overwhelmed and opt to fix the issue yourself. 

However, resist the urge for DIY emergency solutions as you could end up actually making things worse. 

Professional plumbers who provide 24/7 emergency solutions can get to you even during holidays and offer a permanent solution for your plumbing needs. 

Backflow Plumbing Services

Backflows are a common plumbing issue. 

When there’s a backflow problem with your plumbing system, what you want to flush and get rid of end up recirculating back into your system, exposing you to toxins. 

It’s important to make sure that what you flush is removed well away from your water supply. 

Reputable plumbing technicians will take measures to prevent backflow as well as teach you how to avoid backflows. 

Drain Services

Professional plumbers in Melbourne install, maintain and repair your drains to prevent flooding and ensure that your drainage system is working correctly. 

Some of the drainage services provided by professional plumbers include:

  • Drain cleaning
  • Drain line inspection
  • Drain maintenance and repair

CCTV Inspection In Melbourne

CCTV cameras have become essential tools in the plumbing industry. However, why are CCTVs used for blocked drains? 

Plumbers use CCTV cameras for visual inspections of the drain system, sewer lines and pipes that are underground or not accessible. 

A CCTV drain inspection will allow the plumber to identify all types of issues, including root intrusion, debris buildup, obstructions and leaks. 

The check is performed both before and after repairs to confirm that your drain is clean and working correctly. 

A CCTV inspection is crucial, especially if you’ve experienced repeated issues with your drain. 

Also, a CCTV inspection of your drain can make a world of difference before you purchase a house in Melbourne. CCTV inspections provide world-class benefits. 

Therefore, make sure to confirm that your plumber uses CCTV for drain inspection before you hire.

If you are looking for a trustworthy and reliable plumbing service in Melbourne, then look no further than Austest Pipeline Solutions.

We have more than 20 years’ experience in domestic, commercial, and industrial plumbing with water leak detection our speciality.

Please call us today for all your plumbing needs on 0410 609 961 or contact us through our website https://www.aus-test.com.au/contact-us/