Tag Archives: water leak behind wall

Detect Leak Behind Walls
05
Mar
2020

Do you suspect that your home has a water leak inside its walls? If you do, don’t hesitate to start working on a solution.

Whether you’re considering renovating your older house or you’re considering buying one, you need to familiarise yourself with water damage.

The most challenging factor about water damage is that unlike other typical home repair problems, water damage won’t set off any alarms, and you probably won’t hear or see the problem.

And by the time you catch on, you’re dealing with a nightmare that will not only cost you thousands of dollars but could also be dangerous.

Left undetected, water behind your walls can cause severe damage to your drywall and floor.

Besides, a water leak behind walls creates the perfect environment that rots wood, attracts pests like termites, and breeds mould.

What Causes Water Leaks Behind Walls?

Before you start looking for signs, you need to understand the cause of the water leak.

Typically, water leaks behind the walls are as a result of defective plumbing. However, the leaks could also be due to a leaky foundation or just rainwater dripping down inside the walls.

Other causes include:

  • Hard water can also corrode your pipes creating a leak
  • Frozen pipes could also burst and cause the leak

Often, when you have faulty plumbing behind your walls, it can be quite tough to detect trouble early.

Luckily, you can get ahead of the problem by looking out for the vital signs of a leak inside your walls. These signs include:

1. Musty Odours

When you have an undetected water leak, it means that water is slowly dripping from the leaky pipe behind your wall.

As a result, since the water doesn’t have a chance to dry, the floor as well as the drywall stay damp and start to emit a musty odour – an odour that smells like wet cardboard.

Therefore, pay close attention to musty smells in your home because you might end up sniffing out a hidden leak in your internal walls.

2. Water Puddles Near Your Walls

This is an easy one, just walk around the house and look for any signs of standing water near your walls.

If you haven’t cleaned you home recently, then check for a wet carpet or a standing puddle of water near the walls. This is a sign of a leak behind your walls.

#Tip – You’re most likely to find wet flooring in the bathroom or kitchen near the sink, dishwasher or washing machine.

3. Wall Discolouration

One of the best indicators of a leak behind your walls is when you notice discolouration on your walls. Often, you’ll see wet spots on your wall, followed by discolouration.

Besides, when mould grows due to a leak in the walls, they leave a stain that grows. Look for sections of your walls that have stains or the appearance of sweating.

4. Peeling Paint Or Wallpaper

In addition to stains on your walls, a leak behind the walls can cause paint and wallpaper to start peeling.

Since a majority of residential houses have water-based paints that don’t react well with water, when your walls come into contact with water regularly, the wallpaper and paint start to peel.

You can also check the walls for a change in texture to help you detect a leak behind the walls.

5. Unexplained Increase In Your Water Bill

Have you noticed an unexplained increase in your water bill recently?

If you have, then the chances are that there’s an undetected leak somewhere; It could be either outside your home or inside your walls, that’s causing the increase in your water bill.

Being proactive can help keep small plumbing issues become more manageable, so stay vigilant!

If you are looking for a trustworthy and reliable plumbing service in Melbourne, then look no further than Austest Pipeline Solutions.

We have more than 20 years’ experience in domestic, commercial, and industrial plumbing with water leak detection our speciality.

Please call us today for all your plumbing needs on 0410 609 961 or contact us here.

How Find Hidden Water Leaks Plumbing
04
Feb
2020

Are you getting a high water bill? Have you noticed internal or external cracks on the premises?

If so, you might be experiencing a hidden water leak in your home.

Hidden water leaks can drain your wallet and result in potential disaster if not detected on time. There are many signs of hidden water leaks.

You should be able to identify some of these signs in order to avert a potential disaster in the long run. Therefore, we will take a look at the following:

  • Check The Water Metre
  • Monitor Your Utility Bills
  • Use Your Common Sense
  • Call A Professional Plumber

Check The Water Metre

When it comes to leak detection, checking the water metre is the most effective way of telling if you have a leak in some part of the plumbing system in your home.

First, turn off the water in your home by shutting off all faucets. Switch off the washing machine and dishwasher.

Check the metre reading to see if it begins to change.

If the metre runs even after you have shut off the water in your home, it means you have a leak in the plumbing system.

If the metre changes immediately, it’s a fast-moving leak, and you should take immediate action to call a professional plumber to fix the issue.

If the metre doesn’t change immediately, you should wait for one or two hours and re-check the reading.

If the metre changes despite the water being shut off in your home, you are experiencing a slow leak. The leak can be anywhere – even underground.

Make sure you call a professional plumbing technician to help detect where the problem is occurring.

Monitor Your Utility Bills

If your water habits haven’t changed but the bill rises consistently, the plumbing system might be experiencing a leak.

Check some of the previous water bills to see if there is a steady increase.

You can check under the sink, washbasin, and common areas to see if you can detect the leak.

However, some of your plumbing might be underground – which makes it difficult to detect if there is an underground leak.

That’s where a professional plumber needs to make a thorough check of all the pipes in your home.

Use Your Common Sense

Any signs of mould and mildew in your home may indicate a hidden water leak.

You should check the back of kitchen cabinets, sinks, and washbasins regularly for any signs of a foul smell.

Mould and mildew in the kitchen or bathroom are indications of hidden water leaks in your home.

Your common sense can help save thousands of dollars in repairs over time. Immediate action can prevent potential dangers in the future.

If your plumbing system is more than 20 years old, it may be on the declining side of its life expectancy.

It’s best that you call a professional for annual inspections to detect any issues with the plumbing system in your home.

Call A Professional Plumber

Calling a professional plumber to inspect the plumbing system in your home is the best bet against hidden leaks.

A professional is licensed and trained to detect any type of hidden leak in the plumbing system – whether above or below ground.

They use non-destructive acoustic methods and tools to detect underground water leaks.

They can also perform CCTV and drain inspection services to detect hidden leaks in your plumbing system.

The latest technology and equipment will let them pinpoint the exact location of the leak.

If you are looking for a trustworthy and reliable plumbing service in Melbourne, then look no further than Austest Pipeline Solutions.

We have more than 20 years’ experience in domestic, commercial, and industrial plumbing with water leak detection our speciality.

Please call us today for all your plumbing needs on 0410 609 961 or contact us here.

How Detect Roof Leak
05
Nov
2019

Do you have a leak in your roof but aren’t exactly sure where it is coming from? If so, then please continue reading to learn how to detect the source of the leak.

Roof leaks can be caused by a number of things including gaps in the metal flashing around vent pipes and chimneys, missing shingles, or even small holes in the roof.

The source of a leak is usually not obvious on the actual roof and can be hard to isolate because the water may run down the rafters and roof decking before it drips onto the ceiling below.

Here are the general steps that a professional plumber will follow when it comes to detecting roof leaks:

Step 1: Visual Inspection

The sight and sound of dripping water are usually the first signs of a roof leak. However, there are other signs to also check for, such as:

  • Warped or missing shingles
  • Bulging patches on the interior walls
  • Spots on the exterior walls
  • Water stains on the ceiling
  • Musty odours in some rooms

All these signs could be indicative of a potential leak somewhere in the roof. The first place that you notice the leak might not necessarily indicate the exact location of the leak.

For that, some further investigation will be required. Sometimes a visual inspection isn’t complete without checking the attic.

This means that the technician will need to climb up into the attic to check for the roof leak.

Once in the attic, they will look for water stains, mould, or black marks along the roof sheathing and rafters.

If you don’t have an attic, then they will need to check the roof for any signs of damage as described in step 1 above and move straight to step 2 as described below.

Step 2: Water Test

If the technician is unable to isolate the source of the leak with a visual inspection, they will then perform a water test.

To do this they will need someone else to assist them. Someone will need to stay inside the house close to the spot where you first noticed the leak.

The technician will need to go up the roof with a garden hose and wet the roof one section at a time. The person inside the house will shout out once they see any water dripping.

This can be a lengthy process as they will need to spend several minutes in each area.

However, it is an important step as it helps to narrow down the area where the leak most likely originates from.

If the person inside the house sees the water dripping, but cannot find the exact spot where it is coming from, then the shingles may need to be removed in the suspected area to try and narrow down the source of the leak.

Step 3: Repairs

Depending on the location of the leak, there are several potential fixes that can be used.

This is where you will need to call in the experts as they will have all the necessary tools and knowledge to fix the problem.

Some of these repairs may include the following:

Replacing Damaged Shingles: If damaged shingles are the source of the leak, they may need to be removed and replaced with new shingles.

Reapplying Caulk Along Window Edges, Vents, and Chimneys: If there is a leak around any of these areas, the caulk will need to be replaced around the flashing.

Fixing the Roof Penetration Flashing: Damaged roof vent flashing can let water in where it shouldn’t be.

If the existing flashing is in good shape, it might just be a matter of simply replace the screws with better ones. If not, new flashing will need to be installed.

Final Thoughts

Identifying the source of a roof leak can be very difficult to do on your own. If you suspect that you have a leak in your roof, then it really is best to call in the professionals.

They will identify the extent of the leak and recommend a suitable solution in the form of roof repair or replacement.

If you are looking for a trustworthy and reliable plumbing service in Melbourne, then look no further than Austest Pipeline Solutions.

We have more than 20 years’ experience in domestic, commercial, and industrial plumbing with water leak detection our speciality.

Please call us today for all your plumbing needs on 0410 609 961 or contact us here

05
Oct
2019

Is your home experiencing a slab leak? A slab leak is a term used to describe a water pipe leak under a concrete floor and can cause big problems. Let’s read more about this below.

Slab leaks affect buildings and structures of all ages. A minor water leak under concrete can develop into a costly and inconvenient endeavour over time.

The faster the leak is detected, the lower your repair costs will be.

Having said that, finding a water pipe leak under concrete isn’t an easy task and will more than likely require the services of a trusted plumber.

However, you should be aware of the signs of a slab leak to detect it correctly.

There are many signs of a slab leak. When the faucet is turned off and you hear the sound of water, it’s one of the most common signs of a water pipe leak under concrete.

If you find hot spots on the floor, it may indicate a hot water line leak. Another sign of a slab leak is mould or excessive moisture under your carpets.

A damp carpet with signs of mildew or mould indicates a water pipe leak under concrete. This may also produce a peculiar odour at times.

Wet baseboards is another sign of a slab leak in your home.

This article provides information on water pipe leak detection under concrete. We will take a look at the following:

  • Locate the pipes in your house
  • Check the water meter
  • Perform the initial pressure test of your home
  • Perform a complete electronic leak detection service

Locate The Pipes In Your House

You should know the location of the main water supply to your house to find water pipe leaks under concrete. There should be a main water shut-off valve installed inside your property.

This should be used in the case of an emergency or for repairs. It’s important that you take a tour inside the house and locate the plumbing system and know how it’s structured.

This is the first step you need to take when locating water pipe leaks under concrete.

Check The Water Meter

Both minor and severe pipe leaks can be detected by performing a simple test by yourself. First, you need to turn off all water supply sources in your home and record the reading on the water meter.

Wait for 10 minutes and check the reading once again. If there is a difference in the reading, a water leak is likely. This is the best way to detect whether there is a water leak in your home.

Perform The Initial Pressure Test Of Your Home

Testing the water pressure of your home isn’t a difficult task. It can easily be completed using an inexpensive pressure gauge.

You should adjust the water pressure so that it doesn’t place excess stress on your plumbing system. This will help prevent water pipe leaks in the first place.

You should keep on testing the water pressure regularly to prevent the problem from damaging the plumbing system in your home.

Perform A Complete Electronic Leak Detection Service

There is non-invasive equipment to detect water leaks in your home. Drainage CCTV camera equipment is the best to detect water leaks in your home.

That’s where you need the help of a professional leak detection service.

With hundreds of such service providers in the country, it’s not easy to find the right service provider. Your research plays an important part in this regard.

Make sure you do extensive research before deciding to find the best leak detection service for your needs.

Look for the reputation, experience, credentials, and customer feedback of the leak detection service.

If you are looking for a trustworthy and reliable plumbing service in Melbourne, then look no further than Austest Pipeline Solutions.

We have more than 20 years’ experience in domestic, commercial, and industrial plumbing with water leak detection our speciality.

Please call us today for all your plumbing needs on 0410 609 961 or contact us here