Author Archives: developer

Corrosion in water pipes can develop inside a plumbing system for years even before an obvious sign appears. This is especially relevant in older properties with metal plumbing, where long-term exposure to water and surrounding conditions can gradually change the condition of the pipework.

Corrosion shows up as discoloured water or recurring leaks, is usually caused by factors like pipe material, water chemistry and age, and is confirmed using methods such as acoustic leak detection or CCTV inspection.

Australian Drinking Water Guidelines list pH, temperature and dissolved oxygen as key corrosion factors. The first clue might be brown or rusty water from a tap. It could also be a recurring leak, a change in water flow, staining around exposed pipework or visible rust on an old section of metal pipe.

Plumbing symptoms can have several possible causes, and the affected pipe may be hidden behind a wall, beneath a floor or underground. A professional inspection can help identify what’s happening, locate the affected pipework and assess its condition.

What Is Water Pipe Corrosion?

Corrosion is the gradual deterioration of a metal caused by chemical or electrochemical reactions with its surrounding environment. In a water pipe, the metal is exposed to water and substances dissolved in it. Depending on the material and conditions, this can cause changes to the pipe’s internal or external surface.

Different metals respond differently. Copper, steel and galvanised iron can all corrode, but the process and appearance can vary. Galvanised iron pipes, for example, have a zinc coating that provides protection to the steel beneath it. As that protective layer deteriorates, the underlying metal can become more exposed.

Corrosion may appear as surface staining, pitting or a more general loss of material. Deposits or scale may also build up inside affected pipework. Pitting is particularly important because it can create small, localised areas of deeper corrosion instead of affecting the entire pipe evenly.

Age can also influence the condition of older plumbing systems. A pipe that has been exposed to water and environmental conditions for many years may have experienced repeated chemical reactions, deposits and changes to its protective surface. But that doesn’t mean every old metal pipe is in poor condition.

What Causes Corrosion in Water Pipes?

Corrosion usually results from an interaction between the pipe material and its surrounding conditions. Understanding what causes corrosion in pipes means looking at several factors, including:

  • Pipe material – Copper, galvanised iron, steel and other metals have different corrosion characteristics. The material, coating and fittings can all influence how a system behaves.
  • Age and condition – Older pipework has had more time to experience exposure to water, moisture and other environmental factors. Existing surface deterioration can also change how the metal responds.
  • Water chemistry – Water chemistry can influence corrosion. Factors such as pH, oxygen availability, temperature, hardness and dissolved substances can affect the interaction between water and metal.
  • Moisture and environmental conditions – External moisture and the conditions surrounding buried or concealed pipework can contribute to deterioration.
  • Contact between different materials – Certain combinations of dissimilar metals can contribute to galvanic corrosion, an electrochemical process that can cause one metal to corrode more readily than another.

Conditions affecting one plumbing system may not have the same effect on another. The location of the pipe also matters. A copper pipe inside a home can experience different conditions from a metal pipe installed underground.

That’s why it’s important to consider the likely cause alongside the material, location and condition of the affected section.

What Are the Signs of Water Pipe Corrosion?

The signs of water pipe corrosion aren’t always obvious. Some can look like ordinary plumbing problems, which is why several symptoms may need to be considered together.

Common warning signs include:

  • Brown or rusty water – Corrosion products from metal pipework can contribute to water discolouration.
  • Visible corrosion – Rust, staining, flaking surfaces or noticeable changes to exposed metal pipework can indicate deterioration.
  • Recurring leaks – Repeated leaks from older sections may warrant investigation, particularly if the same area continues to cause problems.
  • Reduced water flow – Internal corrosion, scale or deposits can reduce the space available for water to pass through a pipe.
  • Changes in water pressure – A change in pressure can have many causes, but it may be relevant when other pipework symptoms are present.
  • Ageing pipework – Older metal plumbing deserves closer assessment if there are also visible changes, leaks or flow problems.

The pattern can help narrow down the cause. For example, a change affecting only one tap may have a different cause from a problem affecting several outlets throughout a property.

Likewise, visible corrosion on an exposed pipe doesn’t necessarily mean concealed pipework elsewhere is affected. An inspection can help determine whether the issue is limited to one section or points to a broader plumbing problem.

Why Is My Tap Water Brown or Rusty?

Brown water from tap outlets can be alarming, particularly if the water has previously been clear. Corrosion inside older metal plumbing can contribute to brown, orange or rusty-looking water when material from the pipe surface enters the water. However, the colour alone doesn’t confirm pipe corrosion.

Discolouration can have other causes, including the condition of internal plumbing materials and changes affecting the water supply. The Victorian Department of Health guidance notes that metals from plumbing products can enter water under certain conditions and that copper pipes and galvanised iron can contribute to staining around plumbing fixtures.

In addition, hot water systems may contain more dissolved minerals and metals because of the heating process.

If discolouration occurs after a period without water use, the plumbing conditions within the property may need to be considered. If only hot water is affected, the hot water system and its associated pipework may also warrant investigation.

Recurring rusty water from tap outlets is worth investigating, especially in a property with older metal plumbing. Instead of assuming corrosion right away, first establish whether the pipework is contributing to the problem.

How Does Corrosion Affect Old Metal Plumbing Pipes?

Corrosion can affect a pipe from the inside, outside or both. Internal corrosion can change the surface of the pipe and, in some cases, contribute to deposits or a reduction in the internal opening available for water flow. This can affect how efficiently water moves through the plumbing system.

External corrosion can change the condition of the pipe surface and, depending on its extent, reduce the strength of the material. Localised pitting can be significant because a relatively small area can experience deeper material loss than the surrounding surface.

Over time, deterioration can affect pipe integrity. A weakened section may become more susceptible to leakage, particularly if other stresses are present.

Corrosion can also affect water quality characteristics. Australian guidance notes that metals can be released from plumbing products, particularly when they have deteriorated or corroded. This is one reason the condition and material of internal plumbing can matter when investigating water-quality concerns.

A pipe can show signs of corrosion without having a leak or major flow problem. How much the pipe has deteriorated depends on the type of corrosion, the material and the conditions around it. Instead of judging the system from age alone, it’s best to schedule an assessment.

How Is Water Pipe Corrosion Detected?

Investigating suspected corrosion starts with the available clues. A professional will consider the symptoms you reported, the age and material of the pipework, where the affected pipe is located and whether there are signs of leakage, moisture or deterioration.

Visible pipework can be examined directly. Surface rust, staining, flaking or other changes can provide useful information, although visual inspection cannot show the full condition of concealed pipework.

Depending on the pipework and potential issue, the professional can use different inspection methods.

  • Acoustic leak detection uses sensitive equipment to identify the sound produced by escaping water from pressurised pipework. This can help locate a suspected leak without immediately opening up walls, floors or other surfaces.
  • Thermal imaging can identify temperature differences associated with certain water leaks. It can help narrow down the area requiring further investigation.
  • Moisture detection can identify elevated moisture levels within building materials, helping establish whether water has affected an area around suspected pipework.
  • CCTV inspection can provide a direct view inside suitable drainage systems or accessible pipework. It can help identify cracks, damage, blockages and other internal conditions.
  • Pipe locating can help identify the route of underground or concealed pipework when its position is uncertain. This can make it easier to investigate the affected section.

The purpose of these methods is to gather evidence. Considering the symptoms, pipe information and inspection findings together can show what’s happening and where the issue is coming from.

Can Corroded Water Pipes Cause Leaks?

Corrosion can weaken a pipe as the metal gradually wears away. Affected sections can get thinner or develop small areas of deeper damage. In time, water may find its way through the weakened section.

Corrosion is only one possible cause of a leak. Movement in the pipework, physical damage, failed connections, excessive pressure and other plumbing problems can also lead to water escaping.

Where the leak appears isn’t always where the pipe is damaged. For concealed pipework, water can travel along a wall, beneath a floor or through other building materials before it becomes visible.

This can make the water leak source harder to identify from the visible leak alone. An inspection can help trace the leak to the affected area and assess the pipework there.

How to Prevent Corrosion in Water Pipes

Corrosion can’t always be prevented, particularly where existing metal plumbing has already experienced years of exposure. But there are sensible steps you can take to manage the condition of your plumbing.

  • Address leaks and moisture issues promptly. Ongoing moisture around exposed pipework can contribute to external deterioration and may also indicate another plumbing problem.
  • Keep an eye on ageing metal pipework. Rust, staining, surface changes or recurring leaks can indicate that a section needs closer attention, even if the plumbing is still working.
  • Investigate repeated symptoms. If water flow keeps changing or discolouration continues to appear, investigating the underlying cause can be more useful than dealing with each occurrence separately.
  • Know what’s installed. Keeping track of the age, material and general layout of the plumbing can make future investigation easier, particularly in older homes where pipework may have been modified over the years.
  • Arrange an assessment when concerns arise. This can help determine whether corrosion is contributing to the problem and give you a better understanding of the condition of the affected pipework.

Proper maintenance can’t guarantee that corrosion will never occur. However, it allows you to spot changes in pipe condition and deal with problems before they become more difficult to investigate.

When Should You Inspect Your Water Pipes?

If you notice any of the following, it might be time to schedule a professional inspection:

  • Brown or rusty water that keeps returning, particularly in a property with older metal plumbing.
  • Leaks that keep coming back, especially when they occur in the same area after previous repairs.
  • Changes in water flow or pressure, particularly when they occur alongside other plumbing problems.
  • Visible rust, staining or deterioration on exposed pipework.
  • Uncertainty about older pipework, such as not knowing the age, material or condition of pipes concealed within walls, floors or other areas.
  • Recurring plumbing problems that have no clear cause, where further investigation could help identify the real issue.

An inspection can help distinguish corrosion from other plumbing issues and establish whether the problem is limited to one section or affects a wider part of the system.

If you’re a property owner or manager, this can help you get a better understanding of ageing plumbing and determine whether a recurring issue needs attention beyond the affected section.

How Austest Pipeline Solutions Can Help With Water Pipe Corrosion

Do you suspect corrosion in your water pipes? The first step is to establish what exactly is going on. Brown or rusty water, recurring leaks, reduced flow and visible pipe deterioration can all provide useful clues, but none confirms corrosion by itself.

At Austest Pipeline Solutions, we use the right technology and approach to investigate suspected water pipe corrosion and related plumbing issues across residential, commercial and industrial properties in Melbourne.

If you’ve noticed recurring signs or are concerned about the condition of your pipework, get in touch with us to discuss an inspection.

What’s more frustrating than a leaking balcony? Finding water damage in a spot that has nothing to do with where the leak actually started. There’s the visible damage you can spot easily.

But you have to remember that water can move beneath tiles, through concrete, and into building cavities before it finally shows itself. By the time a ceiling stain appears, the point where water entered may be several metres away.

Balconies in Melbourne are exposed to rain, temperature changes, and movement, so their waterproofing and drainage systems need to work together. You don’t just seal the most obvious crack or stain.

Proper repair starts with balcony leak detection, which helps find where water is getting in and how it’s travelling. Understanding the cause makes it easier to choose the right repair. 

Why Do Balconies Leak?

A balcony relies on several components working as a system. That includes the waterproofing membrane, substrate, tiles or other surface finish, drainage, falls, movement joints, sealants, and junctions around doors and walls. 

With a balcony leaking, the cause may not always be obvious. If one part is damaged or poorly designed, water can find a way into areas where it shouldn’t be.

Failed or Damaged Waterproofing Membrane

The waterproofing membrane is a critical barrier against water ingress. If it was poorly installed, damaged during later work, compromised by movement or has deteriorated over time, water may reach the substrate beneath the finished surface. This is why tiles and grout shouldn’t be treated as the balcony’s entire waterproofing system. 

A new layer of sealer or fresh grout may improve the surface, but it can’t necessarily compensate for a membrane that has been compromised.

Cracked Grout, Tiles, and Movement Joints

Cracked grout, damaged tiles, failed sealants, and deteriorated movement joints can create pathways for water to enter the balcony system.

Balcony materials can expand and contract as temperatures change, and different materials may move at different rates. They can also be affected by building movement and regular exposure to rain and weather changes. Movement joints and flexible sealants help accommodate this activity, while damaged joints can leave vulnerable areas exposed.

Poor Drainage, Falls and Ponding Water

A balcony needs appropriate falls so water can flow towards its drainage points. Blocked outlets, inadequate falls, or low spots where water regularly pools can increase the risk of a balcony leak. If water remains against a door threshold, wall, or other vulnerable area, it has more opportunity to find a pathway through damaged joints or waterproofing details.

You can repair the membrane, but if you don’t address the underlying drainage issue, there’s a chance the problem will recur.

Failed Seals Around Doors, Walls, and Penetrations

Some of the most vulnerable areas are where different materials meet or where something passes through the waterproofed area. Common points include:

  • Door thresholds
  • Wall-to-floor junctions
  • Balustrade posts
  • Pipes and other penetrations
  • Flashings and transition points

Careful waterproofing and sealing is crucial because the materials can move at different rates. A penetration that hasn’t been properly detailed can also create a pathway for water beneath the surface.

What Are the Warning Signs of a Leaking Balcony?

Signs can appear inside the property, in the area below it, or on the balcony itself. Water doesn’t always travel in a straight line, so the location of a stain isn’t necessarily the location where water entered.

Signs Inside or Below the Balcony

Some signs can indicate that water has moved through concrete, cavities, or other building materials before becoming visible. This is particularly important for apartment owners and strata committees. A stain directly below a balcony may be related to water entering elsewhere, so treating the visible patch alone may not resolve the source. Watch out for:

  • Water stains on ceilings or walls
  • Bubbling, peeling, or blistering paint
  • Mould growth
  • Musty or damp smells
  • Damaged plasterboard
  • Swollen skirting or timber
  • Efflorescence, which appears as white crystalline deposits
  • Rust staining
  • Dampness that returns after rain

Signs on the Balcony Surface

The signs can guide an investigation, but they don’t always reveal the full extent of the problem. A balcony may look reasonably sound on the surface while water is travelling underneath. The balcony itself may show clues such as:

  • Cracked or missing grout
  • Cracked tiles
  • Loose or drummy tiles that sound hollow when tapped
  • Failed sealant
  • Surface cracks
  • Ponding water
  • Blocked drains or outlets
  • Deterioration around door thresholds and penetrations

Why Doesn’t Sealing the Surface Always Fix a Leaking Balcony?

Applying silicone, replacing grout, or adding a surface coating may address a localised issue. But note that none of that is a universal answer to balcony leaks.

If water is already entering beneath the surface, the waterproofing membrane has failed, or movement and poor drainage continue to place stress on the system, a surface repair may only deal with one part of the problem. There’s an important difference between blocking one visible entry point and repairing the waterproofing system as a whole.

When Regrouting or Resealing May Be Enough

Regrouting, replacing damaged joints, or resealing a localised area may be appropriate when the deterioration is limited to the surface and the underlying waterproofing remains sound. Proper assessment is essential.

Don’t treat regrouting as the default solution just because the grout is cracked. For example, if water is appearing in the room below, further investigation is needed before deciding on a repair.

When a Deeper Repair Is Needed

Some situations call for addressing the cause and the pathway of water. These include:

  • The waterproofing membrane has failed
  • Water is entering rooms below
  • Tiles are loose or extensively damaged
  • The substrate has deteriorated
  • Drainage or falls are inadequate
  • The leak continues after previous surface repairs

How Is a Balcony Leak Properly Diagnosed?

Diagnosis starts with a professional assessment to identify where water is entering and how it’s travelling. With balcony leak detection, technicians can identify the source before deciding on the most appropriate repair. They inspect the following:

  • Balcony surfaces and finishes
  • Grout and sealants
  • Drainage points and outlets
  • Falls and ponding
  • Door thresholds
  • Wall-to-floor junctions
  • Balustrade penetrations
  • Pipes and other penetrations
  • The ceiling or rooms beneath

Depending on the building and suspected source, they may use moisture measurements, controlled water testing, flood testing, hose testing, thermal imaging or invasive inspection. The right approach depends on the construction, the symptoms and the evidence available.

Checking Drainage, Falls, and Ponding

Water that repeatedly pools against a door, wall, or other vulnerable area can contribute to recurring water ingress. While a blocked outlet may be relatively straightforward to fix, inadequate falls often require more extensive remedial work. Either way, identifying the drainage issue helps establish whether waterproofing repairs alone will provide a lasting result.

Testing Before Choosing a Repair Method

With a proper diagnosis, technicians can determine the most suitable repair option. If the diagnosis is inaccurate or you completely ignore the leak detection process, you could end up paying for the same problem twice (or more). Here are some possible repair methods:

  • A targeted grout or joint repair
  • Localised resealing
  • An over-tile waterproofing system
  • Tile removal and membrane replacement
  • Drainage correction
  • Substrate repair
  • More extensive remedial work

How Do You Repair a Leaking Balcony?

The right repair depends on the cause, the condition of the existing finishes, the state of the membrane and substrate, the drainage system, and the extent of any water damage.

Targeted Grout, Joint, and Sealant Repairs

Localised repairs may be suitable for isolated surface defects, damaged grout, or failed sealant where the underlying waterproofing system remains effective. This can involve removing deteriorated grout, replacing it, and resealing appropriate joints. Damaged tiles may also be replaced where necessary.

The important point is that these repairs should match the problem. They’re not a substitute for membrane replacement where the waterproofing system itself has failed.

Over-Tile Waterproofing

In some situations, a suitable over-tile waterproofing system may allow a balcony to be waterproofed without completely removing the existing tiles. This can be a practical option, but it isn’t suitable for every balcony. You’ll have to consider the condition and stability of the tiles, drainage, falls, door thresholds, junctions, and the requirements of the chosen system.

Tile Removal and Membrane Replacement

Where the membrane has failed or the existing system is extensively compromised, removing tiles and other surface finishes may be necessary. The general process may involve:

  • Removing existing finishes where required
  • Inspecting and preparing the substrate
  • Addressing substrate damage or defects
  • Correcting drainage or falls where necessary
  • Installing a suitable waterproofing system
  • Reinstating the appropriate surface finish
  • Properly detailing junctions, penetrations and drainage points

Drainage and Substrate Repairs

Poor falls, blocked drainage, and substrate deterioration can all contribute to water ingress and may require more than waterproofing work. If these issues are left unresolved, a new waterproofing system may still face conditions that contributed to the original leak. A proper repair should consider the balcony as a complete system.

What Happens If You Ignore a Leaking Balcony?

A persistent leak can become a bigger building issue over time. That doesn’t mean every balcony leak will lead to major structural damage, but ongoing water ingress deserves prompt attention. Possible consequences include:

  • Increasing water damage
  • Mould growth
  • Damaged ceilings and walls
  • Timber deterioration
  • Corrosion of embedded steel or metal components
  • Further tile movement
  • Substrate deterioration
  • Damage to internal finishes
  • More extensive and costly remedial work
  • Disputes between owners, tenants, strata committees, and neighbours

How Can You Prevent Balcony Leaks From Coming Back?

Proper maintenance can help protect a balcony waterproofing system and catch problems before they grow. Keep drainage outlets clear and address cracked grout, damaged tiles, and failed sealant promptly. Check areas around doors, walls and penetrations, particularly after periods of heavy rain.

Avoid drilling or installing fixings through waterproofed areas without proper waterproofing details. If your balcony is being renovated, make sure the proposed work accounts for the existing waterproofing system, drainage and junctions.

If water pools on the balcony, don’t simply remove it and move on. Find out why it’s collecting there. Most importantly, recurring leaks deserve proper investigation. Repeatedly patching the same visible crack can become a frustrating cycle if the actual source remains unidentified.

How to Choose the Right Balcony Leak Repair Specialist

Before approving repair work, ask how the source of the leak will be identified and what evidence supports the proposed solution. Consider asking:

  • How will you identify the source of the leak?
  • Does the repair address the membrane or only the surface?
  • Do the tiles need to be removed?
  • How will drainage and falls be assessed?
  • What happens if hidden damage is discovered?
  • What waterproofing system or materials will be used?
  • What areas are covered by the warranty?
  • How could the work affect rooms or properties below?
  • If the property is part of a strata scheme, what approvals or coordination are required?

Apart from comparing quotes, you should also compare diagnoses, proposed repair methods, and long-term risk. A clear scope of work can be more valuable than a low figure that leaves the original cause untouched.

Getting to the Bottom of a Balcony Leak With Austest

A leaking balcony often points to an issue with waterproofing, drainage, movement, or the deterioration of surface components.

Sometimes the answer is a targeted repair. In other cases, the membrane, substrate, or drainage system needs more substantial attention. To determine the suitable repair method, accurate balcony leak detection is important.

If you’re dealing with unexplained or recurring water ingress in Melbourne, Austest Pipeline Solutions can help investigate the source. Contact us today for some clarity and the most efficient, appropriate repair.

Comparing quotes for a CCTV drain inspection can sometimes feel confusing. Two estimates might look similar on paper, yet their final figures and actual inclusions can differ significantly.

When water is backing up at home, or when you are planning an asset audit for a commercial facility, it’s important to understand what you’re actually paying for before approving any works.

In this article, we’ll discuss what a professional survey covers, why prices vary across properties, and how to evaluate quotes with complete confidence.

What’s Included in a CCTV Drain Camera Inspection?

A standard CCTV drain survey provides an evidence-based assessment of your underground drainage network, giving you a clear view inside sewer, stormwater, or industrial drainage lines. A professional survey typically includes:

  • Mobilisation of specialised inspection rigs and push-rod camera equipment
  • Visual camera inspection along specified drainage runs
  • Digital recording of internal pipe conditions in real-time
  • Identification of visible defects, such as line displacements, joint separations, crack networks, root intrusion, debris accumulation, or collapsed sections
  • Location mapping of identified faults relative to surface ground points
  • A clear summary of findings paired with practical recommendations for next steps

When there are signs of a blocked drain, a comprehensive survey doesn’t just confirm that it’s actually blocked. A proper survey goes much deeper.

It reveals what is happening inside the line, pinpoints the exact location and depth of the defect, and provides the clear diagnostic details needed to recommend the right long-term repair or maintenance. 

The Main Factors That Affect the Price

Drainage networks vary greatly from site to site, which is why survey prices adjust based on job scope. Several core factors influence the overall investment required for an inspection.

Pipe Length and System Diameter

Inspecting a short residential sewer connection requires less time and smaller equipment than surveying several hundred metres of commercial stormwater infrastructure. Larger pipe diameters demand heavy-duty tractor camera crawlers rather than standard push-rod systems, which affects setup and equipment requirements.

Access Points and Site Depth

If a technician can easily access cleanout points or inspection openings at ground level, the job moves along smoothly. However, if access requires unsealing heavy covers, working inside confined spaces, using ladders, or searching for buried pits, setup takes longer and requires additional safety measures.

Site Complexity and Risk Controls

Work performed across busy commercial yards, industrial facilities, or civil construction sites often requires formal risk assessments, site inductions, and specialised safety gear. When traffic control or strict site permits are necessary, those requirements naturally shape the survey scope.

How Cleaning, Blockages, and Access Can Affect the Quote

A CCTV camera requires a clear line of sight to capture useful footage of the pipe wall. If a pipe is completely filled with heavy silt, thick grease, tree roots, or standing water, the camera lens will simply record murky liquid or solid obstructions.

In these situations, the line needs to be cleaned using high-pressure water jetting before the survey can proceed. Some initial quotes assume the pipe is already clear and accessible, while others build pre-inspection jetting directly into their estimate.

If a camera encounters a severe collapse or an impassable root mass halfway down a line, the technician may need to clean the section or locate the obstruction from a secondary access point. Understanding whether your quote covers line cleaning or potential access adjustments ensures there are no surprises during the inspection.

Why a Cheap Camera Inspection May Not Be a Full Survey

It is common to see low-cost offers for a quick drain camera check. While a quick look can work fine for a simple domestic blockage, it is very different from a full diagnostic CCTV survey.

A basic inspection often consists of a technician pushing a camera down a pipe to locate an immediate obstruction, clearing it, and leaving without providing permanent documentation. Conversely, a comprehensive survey for property acquisitions, strata records, insurance claims, or construction sign-offs demands a higher standard of care.

When reviewing quotes, it helps to look beyond the headline price tag. Ask yourself whether the quote includes high-definition video footage, a written condition log, and professional interpretation of structural faults. A low-cost inspection that fails to document defects properly can end up costing more if you have to re-inspect the line later to satisfy a builder, council, or insurer.

A Comprehensive Report After a CCTV Inspection

The final report is one of the biggest differences between a quick camera inspection and a comprehensive survey. The quality of this documentation determines how useful the survey is for repairs, compliance, and long-term asset planning.

A structured CCTV report typically provides:

  • High-resolution video files and key still photographs of defect sites
  • Accurate distance measurements along the pipe run
  • Detailed descriptions of pipe materials, diameters, and joint conditions
  • Specific defect classifications, such as minor cracking versus structural failure
  • Clear recommendations for targeted repairs, drain relining, or ongoing maintenance

For strata boards, insurance assessors, builders, and facility managers, a detailed report provides the proof needed to approve budgets, support claims, or meet compliance standards. High-quality documentation saves endless confusion when multiple stakeholders need to review the problem before agreeing on a solution.

Residential, Commercial, and Industrial Surveys Are Not the Same

The scale of a property dramatically alters the diagnostic process. A residential job usually focuses on one or two household lines to locate a localised issue like tree root intrusion. These jobs are generally straightforward and involve familiar domestic layouts.

Commercial, industrial, and civil sites present a completely different environment. These properties often feature complex multi-line networks, trade waste systems, deep access pits, and strict work-health-safety protocols.

Austest Pipeline Solutions brings specialised technical capability to these demanding environments. Handling larger pipe diameters, long runs, and complex site layouts requires advanced diagnostic equipment and experienced operators who understand high-level pipeline infrastructure. 

When a CCTV Survey Can Save Money Later

While booking a professional survey carries an upfront cost, accurate diagnostics almost always save money over the life of a property. Guessing what is happening underground frequently leads to unnecessary excavation, incorrect repairs, and repeated callouts for the same recurring issue.

A detailed survey delivers long-term financial value by:

  • Pinpointing the exact spot of a defect so excavation is limited to a small area
  • Revealing whether a line can be relined internally without digging up driveways or landscaping
  • Identifying construction debris left behind in new builds before final sign-off
  • Providing clear evidence of pipe condition prior to property purchases or lease agreements
  • Confirming whether a blockage is a simple routine clean or a sign of structural collapse

What to Ask Before Accepting a CCTV Drain Survey Quote

To ensure you are comparing quotes on an equal basis, asking a few practical questions will help clarify the exact scope of work:

  • What specific pipe runs are included in this estimate?
  • Does the price include high-definition video footage and a written report, or just verbal feedback?
  • How are defect locations and depths marked on the surface?
  • Is line cleaning or high-pressure jetting included if the camera encounters heavy debris?
  • What happens if the line is completely blocked and the camera cannot pass through?
  • Does the quote account for specific site access conditions or safety requirements?

Get Clear Scope Before You Compare Prices

Price variations in CCTV drain survey quotes reflect real differences in equipment, site access, cleaning requirements, and reporting detail. A lower quote may cover a basic visual check, while a comprehensive estimate delivers the detailed evidence required for major repairs, strata decisions, or asset management records.

When you need a clear, accurate assessment of your drainage network, getting the right scope from the start makes all the difference. Contact the team at Austest to discuss your property, review your reporting needs, and secure a transparent, professional survey for your site.

A burst water pipe can cause serious damage in a matter of minutes. Whether it happens at home or in a commercial property, the priority is to stop the water, protect people and belongings, and arrange professional help as soon as possible.

Fast action can limit water damage, reduce the risk of mould and electrical hazards, and prevent a manageable plumbing problem from becoming a much larger repair bill. In this article, we’ll discuss burst water pipes in-depth and why it’s considered an emergency.

Why a Burst Water Pipe Is an Emergency

Water inside a pressurised system is always looking for a way out. When a fitting gives way, a join splits, or a line corrodes, that pressurised water can quickly force its way into walls, floors and other building materials.

A sudden burst can ruin floating timber floors, soak carpets, degrade plasterboard walls, and damage expensive cabinetry or workplace equipment in a very short space of time.

Even a smaller rupture or hairline crack presents a real emergency. If water pressure remains in the supply line, the opening will naturally expand over time. As water continues travelling behind hard surfaces, it spreads into structural elements that are difficult to dry out.

Getting prompt professional attention isolates the source of the leak right away. Waiting until a leak looks worse usually means the eventual intervention becomes far more complex and expensive, potentially requiring pipe replacement or more extensive repair work like sewer pipe relining.

Hidden Leaks Can Be Hard to Trace

Not every burst water pipe makes itself obvious with a rushing stream of water. In many cases, there are only subtle signs of a leak, yet the pipe has already ruptured underground, inside a concrete slab, or behind walls. Guessing where the leak sits often leads to unnecessary cutting, digging, or structural disruption.

This is where specialist water leak detection becomes so valuable. Rather than smashing through plaster or excavating driveways on a hunch, advanced acoustic equipment, thermal imaging, and tracer gas detection can pinpoint the precise origin of the leak.

Austest uses non-invasive diagnostic technologies to find hidden water leaks quickly and accurately, ensuring repair work focuses directly on the source without causing extra damage to your home.

Water Damage Can Spread Beyond the Pipe

Water moves rapidly through walls, floors, and other materials. Once it escapes a pipe, it travels along timber framing, sits inside ceiling insulation, and penetrates subfloors or masonry.

If this moisture remains trapped inside enclosed spaces, it creates ideal conditions for mould growth, lingering odours, plaster staining, and structural timber swelling.

Addressing the leak immediately helps identify every area water has touched. Professional attention confirms where the water came from, whether the supply is fully secured, and which structural zones need proper drying to keep your indoor environment healthy and safe.

A Burst Pipe May Signal a Bigger Issue

A burst pipe is often a symptom of an underlying condition within the broader network. Issues such as water hammer, high mains pressure, tree root intrusion, ground movement, or age-related corrosion can place constant stress on fittings until they fail.

Replacing the damaged section may fix the immediate leak. However, if high pressure or corrosion is still present, another section of the pipe could fail later. Professional assessments look at the complete picture to help prevent repeat failures, giving you durable long-term solutions for older homes, commercial assets, and complex industrial sites.

What to Do First When a Pipe Bursts 

When you discover water escaping into your home, safely locate your main water shut-off valve and turn it off completely. For most residential properties, this valve sits near the front boundary near the water meter. Shutting off the main valve stops fresh water from feeding into the burst section right away.

Next, focus on safety and protecting your belongings. If it is safe to do so, move furniture, electronics, and valuable items away from the wet area to prevent further soaking. Pay close attention to power points, light switches, and electrical appliances.

If water is anywhere near these areas or dripping from a ceiling light, do not touch electrical fittings. Turn off the main power at your switchboard if you can access it safely, and keep clear of the water.

You can also use towels or buckets to contain visible pools of water and take a few quick photos of the affected areas for your records or insurance claims. These steps are practical first responses to stop a burst water pipe, but they are temporary measures. They do not replace the need for a proper professional diagnosis and repair.

What a Professional Plumber Checks First

Before cutting into a pipe or starting restoration work, a thorough professional evaluation takes place to ensure the job is done right the first time. Technicians will evaluate:

  • The exact location and accessibility of the damaged section
  • Whether the leak is active, pressurised, or coming from another water or drainage line
  • The specific material of the pipework, such as copper, galvanised iron, or modern polymer composites
  • Whether the line is concealed underground or embedded within a concrete slab
  • Whether specialised leak detection is required to confirm the full path of the water

Every property is unique, and taking the time to complete a proper diagnosis ensures the right repair method is chosen. This careful approach avoids fixing the wrong area and keeps unnecessary disruption to a minimum.

Get the Burst Pipe Checked Now

A burst water pipe is much easier to manage when you respond promptly. By shutting off the main water supply if it is safe, keeping clear of electrical risks, protecting your valuables, and recording the damage, you put your property in the best position for a fast recovery.

If you suspect a burst pipe or need help locating a hidden leak beneath a slab, behind a wall or underground, professional help can identify the source before unnecessary damage is caused.

Austest provides non-invasive leak detection across Melbourne, using specialist diagnostic technology to locate hidden leaks quickly and accurately. Contact us to request a quote.

Stormwater drains control where rainwater goes once it hits roofs, driveways, and open ground. When that pathway narrows or stops, water starts showing up where it shouldn’t. This is a common issue in Melbourne, where there’s a mix of older pipework tucked under established homes, dense garden growth in many suburbs, and soil that shifts with wet and dry cycles.

Heavy downpours and leaf litter from street trees don’t help. The upside is that most blockages don’t appear without warning. They build from small changes inside the pipes. Before you schedule stormwater drain cleaning, it helps to understand what causes them so issues can be identified early.

Tree Roots in Drains

Tree root intrusion is among the top reasons for blocked stormwater drains. Roots naturally follow moisture, and underground pipes provide a constant water source, especially where small cracks or loose joints are present. Once roots find an entry point, they grow into the pipe and spread out, forming a dense mass that traps leaves, soil, and other debris moving through the system.

Flow slows at first, then eventually stops. This shows up often in leafy suburbs where mature trees have been part of the landscape for decades. Older clay or earthenware pipes are particularly vulnerable since they develop fine cracks over time. Those openings are more than enough for roots to get established.

Once inside, roots expand, bind together, and keep building until the pipe is restricted or damaged. That’s why the issue tends to return if it’s only partially cleared. This is also why managing tree root intrusion around pipework is important.

To confirm the issue, technicians conduct a CCTV drain inspection (more on this later). It offers a clear view of where roots have entered and how far they have spread. With the information they’ve gathered, technicians can determine the right approach for repair.

Leaves, Silt, and Debris

Stormwater systems also deal with a steady stream of everyday material that builds up over time. Leaves, twigs, soil, and fine sediment wash off roofs and garden areas during rainfall. Downpipes carry this mix into pits, then into underground pipes. It flows freely at first, then heavier particles settle in low points, gradually restricting movement. As time passes, the flow path narrows.

Melbourne’s seasons make this more noticeable. Autumn brings steady leaf drop, and sudden heavy rain can push a large volume of material into the system in a short burst. After a storm, drains can shift from working fine to struggling with flow almost overnight.

Renovation or building work can add extra load. Sand, cement residue, and loose material often enter pits and settle inside pipes where water movement is slower. Keeping gutters and pits clear helps reduce build-up, though even well-maintained systems can still collect sediment over time.

Cracked or Collapsed Pipes

Some blockages point to something more structural happening underground. Pipes can crack, shift, sag, or collapse due to age, ground movement, heavy loads above, or pressure from tree roots. Once the pipe structure changes, water no longer flows smoothly. Debris collects at the affected point, which makes the blockage worse.

Melbourne’s clay soils play a part. They expand when wet and contract during dry periods. That movement places stress on pipes, especially older sections that have already seen years of service.

A collapsed pipe doesn’t clear with surface cleaning. The restriction remains until the damaged section is repaired. In many cases, trenchless relining is used to restore the pipe without major excavation.

Poor Installation and Ageing Pipes

If pipes were installed with an incorrect fall, water moves too slowly, allowing sediment to settle. Poorly sealed joints or undersized pipes can also contribute to the issue.

In addition, many Melbourne homes still rely on clay or earthenware stormwater pipes. These materials were common decades ago but are more prone to cracking and root intrusion compared to modern PVC systems.

Older layouts were also designed for different conditions. Rainfall intensity, garden density, and property use have changed over time. Systems that once handled runoff well may now be under more pressure than expected.

With a drain inspection, technicians can confirm whether the issue lies within the system design instead of a one-off blockage.

Foreign Objects and Misuse

Stormwater drains are built for rainwater only. Anything else increases the chance of restriction.

Loose debris from driveways, soil from gardens, and material from outdoor areas often gets washed into pits during rainfall. Once inside the pipe, these materials settle and reduce flow space.

That also includes other liquids like oils and paints. These substances don’t belong in stormwater systems and can contribute to internal build-up over time while also affecting surrounding waterways.

How the Real Causes of Blocked Drains Are Found

Most drainage issues look similar from above ground. Water backs up, drains slow, or overflow appears around the property. The real cause, though, is underground and often varies from case to case.

CCTV drain inspection allows a small camera to travel through the pipe and show exactly what’s happening inside. With it, technicians can identify tree roots, cracks, collapsed sections, or debris build-up accurately. There’s no trial-and-error, and they can see exactly where the problem is.

The technicians then use high-pressure jetting to clear debris. If there’s structural damage, they may conduct relining or repair. The right solution depends on the cause of the blocked drain.

Get Your Drains Inspected Today

Catching the cause early helps avoid flooding, repeat blockages, and larger repair work later on. Small signs often point to bigger issues, and this is something that cannot be overstated.

For three decades now, Austest Pipeline Solutions has been helping Melbourne property owners dealing with ongoing stormwater problems. If you’re experiencing blocked stormwater drains, please know that we’re just around the corner and ready to assist. Get in touch with us today, so we can discuss your concerns.

A stormwater drain’s job is simple. It collects rainwater and carries it away from your home before it has a chance to settle where it shouldn’t. But sometimes it only takes a decent Melbourne downpour for water to start pooling around the yard. The grate fills up instead of draining away.

In some cases, water can spread across driveways, garden beds, and even find its way beneath the house. But there are ways to clear stormwater drain blockages before they turn into a larger issue. Here, we’ll break it down along with the warning signs, common mistakes to avoid, and when it makes sense to bring in a professional for a non-invasive camera inspection.

Signs of a Blocked Stormwater Drain

Stormwater drains usually provide a few clues before flooding becomes a concern. Spotting them early can save a lot of hassle later.

  • Water pooling around drain grates or low areas of the yard after rain
  • Slow-draining stormwater pits
  • Gurgling sounds coming from drain openings
  • Water overflowing from downpipes
  • Soggy patches that remain long after rain has stopped
  • Damp areas developing close to the home
  • Unpleasant odours around stormwater pits or grates

Occasional pooling after exceptionally heavy rain is not unusual. However, recurring blockages or water backing up through the system can indicate something deeper. The earlier you know your stormwater drain is clogged, the more likely you can prevent flooding.

Stormwater Drain Cleaning: Stay Safe Before You Start

So, how do you clear a blocked stormwater drain? Before anything else, make sure you have the right gear.

  • Heavy-duty gloves
  • Sturdy footwear
  • Eye protection
  • A bucket for debris
  • A screwdriver or pry bar to lift grates
  • A garden hose
  • Basic cleaning tools

Stormwater systems can carry dirt, sediment, and bacteria, particularly after rainfall. That’s why it’s important that you have protective gear. Doing it at the right time is also crucial. Avoid working on drains during heavy rain or while water levels are rising. If conditions become difficult to assess or the blockage appears significant, consider stopping and seek professional advice.

Simple Steps to Clear Blocked Stormwater Drain

Many stormwater blockages occur close to the surface. Leaves, silt, garden debris, and organic material gradually build up until water can no longer move through properly. For shallow blockages, you may not need specialised equipment. Here’s what you can do:

Clear Debris and Flush

Start with the drain opening itself. Remove the grate and inspect the pit below. In many cases, the blockage is immediately visible. Leaves, twigs, soil, and accumulated sediment often collect near the entry point.

Using gloves or a small shovel, remove as much debris as possible and place it into the bucket. Once the visible material has been cleared, grab the garden hose. Remove the nozzle if fitted and feed the bare hose into the drain pipe. Push it as far as reasonably possible towards the blockage.

Turn the water on fully while gently pushing and twisting the hose. The added water pressure can help loosen compacted leaves and silt further along the pipe.

Use a Drain Snake or Rods

If flushing alone doesn’t cut it, the blockage may be deeper within the pipe. This time, you’ll need a drain snake or a set of drain rods instead of a garden hose.

Feed the equipment into the pipe slowly and rotate it as you move forward. This helps break apart compacted debris and can also dislodge smaller root intrusions. Afterwards, flush the drain again with the hose to wash away loosened material. A wet and dry vacuum can also be useful for removing shallow debris from pits and drain openings.

Use only gentle pressure, especially on older stormwater pipes. They can be vulnerable to damage if excessive force is used. If the blockage refuses to move, it’s best not to force the issue.

Stormwater Drain Cleaning: What to Avoid

There are a few common risks that can make stormwater problems harder to solve. Using harsh chemical drain cleaners is a good example. While they’re often marketed as a quick fix, these store-bought mixtures are generally not suitable for outdoor stormwater systems. Some can affect pipe materials and may eventually enter local waterways through the stormwater network.

Excessive force is another risk. As mentioned earlier, applying too much pressure or pushing rods through a pipe aggressively can damage older infrastructure. It also helps to avoid clearing the same blockage repeatedly without investigating why it keeps returning. A drain that blocks every few months often indicates an underlying issue that needs proper attention.

Stormwater Drain Blocked? When to Call a Professional

Still can’t reach the blockage? It’s highly likely that the cause is more substantial than surface debris. This is often the case if the stormwater drain keeps overflowing, backs up after every heavy rain, or refuses to clear despite several attempts.

Tree roots are one of the most common culprits across Melbourne properties. They naturally seek moisture and can enter even small openings in underground pipework. Cracked pipes, collapsed sections, and heavy sediment build-up can create similar symptoms. In such cases, professional equipment is paramount.

To conduct proper stormwater drain inspection, technicians use a CCTV drain camera. It goes to the inside of the pipe and pinpoints the exact location of the blockage. Once identified, technicians use high-pressure jetting to remove roots, silt, and debris. If they discover pipe damage, trenchless pipe relining may be needed to restore the drain without major excavation.

Protect Your Home From Flooding By Dealing With Blocked Stormwater Drain

Stormwater drains are easy to overlook until water starts collecting where it shouldn’t. If your area is expecting a downpour, make it a point to prepare. Clear minor blockages if you’re confident doing it on your own. If needed, there’s no harm in calling a professional. It’s important to recognise the warning signs early, so you can act on them fast.

Austest Pipeline Solutions is a quick call away if you ever need assistance. We’ve been helping property owners since 1993, identifying and resolving drainage issues through our licensed technicians, non-destructive CCTV inspections, high-pressure drain clearing, and a fixed-price guarantee.

leak behind wall
04
Aug
2021

Water leaks can be extremely stressful, especially the ones hiding behind your walls. These types of water leaks often cause serious issues—like structural damage and mold growth—before they are even discovered.

They cause problems whether your wall is made of wood, concrete, or tiles. Here are a few steps you can follow to find out if you have a leak behind your walls.

Let’s check them out.

1. Look for wet patches

If you have a leak hiding behind your walls, there’s sure to be evidence that water is issuing from the broken pipe.

Wet patches are easier to spot on wooden and concrete walls as the watermarks can easily be identified on these surfaces. Walls that are painted or have wallpapers will also show signs of wet patches as the moisture can cause the paint and the wallpaper to peel over time.

However, a tiled wall—like that of your bathroom or kitchen—can make the wet patches harder to spot because tiles will typically block moisture.

If you feel that the leak is hiding behind a tiled wall, it’s best to contact a leak detector or a professional that specialises in leak detection. Some plumbers use moisture meters to detect the presence of moisture when finding a leak behind walls. Moisture meters allow them to narrow down the possible areas where the hidden leak is.

2. Mold on the surface

Another visible effect of constant moisture on your walls is the growth of mold and mildew. These microorganisms can be considered as a visual leak detector as they thrive on damp areas and can proliferate quickly under the right circumstances.

Molds can damage wooden walls as well as any wooden furniture where the wind can blow the spores. If left untreated, mold can spread from a small area and occupy the entire wall.

The area where the mold grows is usually where the leak is. It can either be the exact spot or near it as the moisture coming from the damaged pipe behind the wall creates the ideal condition for mold to grow.

3. Musty odour

Musty odour typically accompanies molds and mildew. Because the walls are often damp from the leak, they develop an odour that smells pretty much like wet cardboard. While it may be challenging to trace where the smell is coming from, it usually is an indicator that there is a leak somewhere behind the wall.

If you suspect that the musty smell is due to a leak in the pipe, you can contact a plumber who can use a thermal imaging detector. The tool can be used to detect moisture levels behind walls which makes checking for leaks behind walls easier than following a musty scent.

4. Dripping sound

The sound of dripping water is a sure sight that there is a leak behind your walls. The sound it makes can also help you determine the position and the extent of the damage in your plumbing.

Dripping sounds with long intervals could mean that the pipe and the leak is located high above the ground and that there’s only a small break in the pipes. Otherwise, dripping sounds that come quickly can mean that the broken pipe is located lower or near the ground and that the damage could be severe.

The audible clues can help you with leak detection as the sound the water makes is never far from the damaged plumbing.

Professionals sometimes use acoustic methods to find where the leak is. They typically use a device that records noise events and can differentiate the sound of normal and unusual water flow in the pipeline.

5. Visible water leak

In some cases, the leak may be from the crevices between the panels of your walls. Water can also gush from the ceiling or the floor. If you are experiencing a spurting leak behind walls, contact a leak detector as soon as possible.

Chances are, you could have a burst pipe and it could fill your home with water immediately.

Visible water leaks mean that the damage in your plumbing is large enough that an awful lot of water is lost.

Conclusion

These are some of the usual suspects that indicate there’s a leak hiding behind your walls. You can use these tips to help pinpoint where the damage is. Otherwise, you may contact a water leak detector to help you put a finger where the leak is.

Just remember to leave fixing the pipes in the hands of professionals, unless you know what you’re doing.

diy water leak detection equipment
06
Mar
2021

Water leaks can be hard to find in your home, yet they can be so common. We rely on water every day in our home, which is why a leak can cause big problems. By detecting them early, you can save money and further damage, getting the problem fixed as soon as possible. Here are 5 tips to help you detect a water leak in your home, so you can contact a plumber straight away and get the issue sorted.

Check your water meter

Many people underestimate the value of the water meter in their home. It can be one of the best ways to tell if you have a leak early on, so you can get on top of it before issues start arising. Start by turning off all the water in your home: taps, washing machine, dishwasher, etc. Now take a look at the meter – if it’s still changing with everything turned off, it’s likely you have a fast-flowing leak that you need to get on top of straight away. If nothing changes, then leave your meter for an hour or two and come back to it. Did it change in this time? It’s likely you have a slower leak, which isn’t as urgent but still handy to get fixed so it doesn’t become a bigger problem.

Keep an eye on your bill

Another good way to detect a leak in your home is by keeping an eye on your water bill. It helps if you have a past bill from the same period of time. You can compare like for like and determine whether your water usage has increased significantly. If it has, there may be a leak in your system that you haven’t picked up before. A professional plumber can check through all of your pipes and determine where it is coming from.

Look for damage

If you have a leak inside your home, you will notice damage over time. Take a look at your showers and bathtubs and note whether any of the tiles surrounding the area seem to be discoloured or damaged in any way. There may be water stains, mould or peeling material that has resulted from a build up of moisture over time. Make sure you take a look under sinks at the back of cupboards that don’t get accessed regularly. This is where damage can go unnoticed and build up over periods of time.

Check outside your home

Leaks don’t just occur in the home. Head outside and check your taps there as well. You can start by connecting a hose and seeing whether a leak occurs when you turn it on. It can help to replace the gasket and tighten everything and try again. If water is still seeping through, it’s a good idea to have it looked at to see what the issue is before it turns into a bigger problem. It can also help to check if the grass near your outside piping is growing much faster, as this can indicate a leak that is feeding into the grass and helping it grow.

Try a dye test

If you haven’t noticed any external damage to your fixtures, but still think there is something going on, you can always try the dye test. Grab some food colouring (any colour works!) and put a few drops into the toilet water tank of every toilet in your home. If the toilet is leaking, you will see dye in the toilet bowl in minutes. This is a sure sign you have a leak and should call the plumber in to take a look at it.

It’s never a great idea to try a DIY fix it job when it comes to a significant issue like a water leak. Instead, you want to get a plumber on the phone straight away so they can come out and investigate the issue further for you. Finding a leak early on can save you plenty of time and money in the long run. The experts at Aus Test Pipline Solutions have a trained eye when it comes to detecting leaks and solving them. For a free quote get in touch with them today and don’t let a small problem turn into a big one.

Which Types Foods Clog Drainpipe Of Sink
08
Jul
2020

It is important to make sure that your drainpipes are well maintained and taken care of, as the consequences, later on, can be quite challenging to fix and will require you to engage a plumber.

In the kitchen, it is not uncommon for bits and pieces of food to slip down the sink and into the drainpipes. However, not all of these food items can totally slip down the pipes.

Some food products can form and create new substances like thick pastes or globs of fat that can lead not only to clogging but damage to the integrity of your pipes, increased water pressure, and more.

Once these food products reach your drain, they can accumulate and stay in place to create one big clog.

As such, it is important to be mindful of the types of food that can clog up the drainpipe of your sink. To help you, we’ve compiled a list of some types of food that can cause your drainpipes to clog.

Food That Can Clog Up The Drainpipes

As a general rule of thumb, food and substances that do not break down such as eggshells, fibrous food, and non-food items like grease and oil will accumulate and clog up your pipes. Here are some of these examples:

1). Coffee Grounds and Tea Leaves

Though these food items are naturally biodegradable, they do not break down in water.

If the quantity is high enough, they can actually form together to create a sludge that can clog your drains. Make sure you dispose of them in another manner.

2). Eggshells

Eggshells have a sand-like consistency that not only causes a foundation to form that leads to a clog but can damage the integrity of your pipes as well.

They also cannot easily break up and break down, which means they can get stuck in your pipes and cause a blockage. This is also applicable to bone shards.

Their membrane layers can also often get stuck and caught up in the pipes, which does not exactly remove the possibility of clogging.

3). Fibrous Foods

Fibrous foods such as onion skins, celery, corn husks, asparagus, and artichokes can become a hazard for your pipes.

This is because they cannot break down into smaller pieces and therefore can often get wrapped up or caught up inside the pipes. 

Which Types Foods Clog Drainpipe Of kitchen Sink

4). Grease

Grease should never go down your drains. Once the grease cools down, it turns into a fatty glob that can buildup on the walls of your drain.

When the buildup becomes thick enough, this will lead to frequency clogging and other problems such as increased water pressure.

Therefore, fat, oil, and grease should not be going down your drain. 

5). Fruit Pits

If you have a garbage disposal in your sink, fruit pits such as peach pits and apple cores can greatly damage the garbage disposal blades.

Moreover, a buildup of the pits of the fruits in the drain can cause major clogs and can even lead to having to replace your pipes. 

6). Flour

Surprising, right? Flour seems harmless when it is dry; however, when it comes into contact with water, it can form a pasty substance that can immediately clog your drain.

It can also double as a trap by catching other food particles and created a compounded food sludge blockage.

7). Pasta

Pasta can expand the more it is exposed to water. Tossing it down the drain is not exactly the smartest idea. The more it expands, the more it can cause a clog in your drains.

Greasy pasta will also pose an even bigger problem. Always be mindful of pasta slipping down the drain.

8). Rice

Rice and pasta have the same characteristic in that they expand the more they sit in water. However, rice can create and form a thick paste, which can lead to some serious clogging.

Generally, starchy foods should not be going down your drain, including potato and their skins.

Which Types Foods Clog Drainpipe Of Sink plunger

Final Thoughts

As we can see, with a bit of care, you can avoid blocked drain pipes by correctly disposing of food scraps and waste.

However, if your drainpipes are seriously blocked, and you are looking for trustworthy and reliable leak detection services in Melbourne, then look no further than Austest Pipeline Solutions.

We have more than 20 years’ experience in domestic, commercial, and industrial plumbing with water leak detection our specialty.

Please call us today for all your plumbing needs on 0410 609 961 or contact us here.

 

How Inspect Blocked Drainpipe
06
Jul
2020

Drainpipes can be incredibly challenging to inspect and maintain if you’re not a plumber and don’t have the right tools and technology.

The traditional methods of excavating pipes and inspecting are costly, time-consuming, and an overall inconvenient method of diagnosing any blockage problems.

However, over the years there have been more and more innovative ways to inspect drainage systems in a cost-effective, non-invasive, and efficient method. 

One of these methods is through a CCTV drain inspection, which makes use of high-tech cameras to visually inspect your pipes and quickly diagnose any present and potential problems in your drains.

So, how exactly does a CCTV inspect a blocked drainpipe? To learn more about this high-tech method of pipe inspection, please keep reading for more!

What Is A Drain Camera Inspection?

A drain camera inspection makes use of a waterproof, high-tech camera that is inserted into your drains to conduct a thorough inspection of the whole drainage system.

This camera, which can travel up to 60 metres down a pipe or drain, will be able to display a live-feed directly to you as it navigates its way throughout the drainpipes.

This will help the technician to immediately identify if there are any problems that are present.

The best part about CCTV drain inspections is that it enables technicians to specifically identify problem points in your drains, whether it be a present problem or a potential problem that may arise in the future.

How Does A Drain Camera Inspection Work?

The mechanics are relatively simple. A CCTV unit will be comprised of a damage-resistant, stainless steel camera head that is attached to a long waterproof push cable.

No excavation or digging is required to install the CCTV units, so once they are all set up, they will simply be inserted into the pipes. 

Once the CCTV unit is inserted into the pipes, the blockage will be inspected to determine where it is situated and how it occurred.

If the blockage is caused by things such as grease, the pipe will be cleared through a method known as jet rodding, which makes use of a high-pressure water jet to clean out your drains.

However, if the blockage is too solid, then an electric eel or a device will be sent down to cut through the blockage and clear up the pipes.

How Inspect Blocked Drainpipe camera

When And Why Is A Drain Camera Inspection Necessary?

Conducting a CCTV drain inspection test can be extremely helpful for the following:

1). Locating pipes, especially if you are planning on renovating, landscaping, or adding additions like a swimming pool.

This way, you’ll be able to create an outline of your drainage system and fix your renovation plans around them to avoid any damage.

2). Diagnosing blockage problems, which is the primary reason why CCTV drain inspections are conducted.

3). Assessing the condition of your drains after they have been jet rodded so that the technician can make any adjustments that can prevent future problems for your drainage system.

4). Inspecting new homes and buildings that may have construction debris in their drainage system. This is especially important as these foreign objects could create some serious blockage or drainage problems in the future.

Advantages Of A Drain Camera Inspection

CCTV drain inspections offer various benefits, one of the main benefits being the process is non-invasive. It will not require any excavation or digging for it to be entered through the pipes.

Because of this, conducting a CCTV drain inspection is also cost-effective, since you don’t have to pay additional costs for disrupting landscape integrity to get to the pipes.

Moreover, CCTV drain inspections are high-tech and effective, as they are not only able to inspect and navigate through your pipes quickly, but they also provide an actual live feed of what is going on down there.

This will make the diagnosis process much quicker, accurate, and efficient, and not a time-consuming process of trial and error.

Final Thoughts

CCTV drain inspections are the best way to efficiently, accurately, and effectively identify any blockage problems in your drains.

It is both a cost-effective and long-term solution that can prevent blockage problems from creating and compounding more drainage problems in the future.

Your home’s drainage system is essential to your livelihood, and it is always important to make sure that it is maintained in the right condition.

If you are looking for trustworthy and reliable plumbing service in Melbourne, then look no further than Austest Pipeline Solutions.

We have more than 20 years’ experience in domestic, commercial, and industrial plumbing with water leak detection our specialty.

Please call us today for all your plumbing needs on 0410 609 961 or contact us here.